Fish Finder Rig for Surf Fishing Updated

Fish Finder Rig for Surf Fishing

The Fish Finder Rig is a popular surf fishing rig used to find where the fish are congregating. It's similar to the Carolina Rig, only rather than a sliding egg sinker, information technology typically is used with a pyramid weight to keep the rig in one area.

In this guide, we'll cover what the video above illustrates including when and when not to use it.

How do you tie a Fish Finder Rig for Surf Angling?

To make your life easier for tying a fish finder rig, you'll need the following tackle.

Fish Finder Rig Tackle

Pyramid Sinker (or spark plug, commodities, or something for a weight)
Plastic dewdrop
Leader line
Swivel
Sinker Slide
Hook

Steps for Tying a Fish Finder Rig

Start by cutting a slice of leader line, mostly, around eighteen inches volition work.
Necktie one end to your hook using a Palomar Knot.
On the other end of your leader line, tie on your swivel using a Palomar Knot.
With your mainline, fish the line through your pyramid sinker and your bead.
Tie your main line to the other side of your swivel using a Palomar Knot. The Palomar makes information technology a scrap tricky since you need to pull your unabridged leader line with the hook through to finish the knot but merely take your time.

Weights

When it comes to weights, near anglers opt for atomic number 82, but there are other options better for the environment. Instead of ownership storebought weights, experiment with using steel which will corrode in the saltwater environment if you lose it.

Beads

The plastic bead helps protect your line from your weight in the water. If you cull not to use i, you lot're risking an unnecessary breakoff of your line.

Leader

Depending on the fish you lot are targeting volition determine which leader line you use. If you're going to be fishing around rocks then you lot should probable opt for monofilament which is a chip more abrasion resistant than fluorocarbon.

Hooks

Your hook size should be based on your bait. If you're going after perch for example and plan to use sand venereal, your hook will exist around a #6. Yet, if you lot're going later on bigger fish and want to use a chunk of cut bait, and so you should call back well-nigh going upward to a #2 or more than. We like to employ circle hooks since they are self-setting.

What is a Fish Finder Rig?

The Fish Finder Rig is a popular surf fishing rig used to catch a wide multifariousness of fish like redfish and stripers.

It involves a sliding sinker that allows the bait to move freely while the bait anchors itself to the lesser.

How to Cast a Fish Finder Rig

Casting a fish finder rig can be challenging depending on the weight used and the length of the leader. If yous're using braid and a weight over two ounces, then we highly recommend that you use a Breakaway Cannon then you don't cut or piece off your finger if you're using a spinning reel.

A longer leader will too add more air current resistance limiting your casting altitude. There are some innovative rigging clips you can use that go along everything streamlined until they hit the water, making your bandage easier.

Fish Finder Rig With Float Option

Sometimes it's helpful to go on your bait off the bottom and away from unwanted critters like skates, rays, or crabs. Having a small float with beads on either side well-nigh the claw will permit that bait to hang up off the ground and hopefully abroad from bycatch.

Fish Finder Rig Offshore?

Out here in California using the fish finder rig offshore isn't as pop as other rigs such as the double dropper loop, unmarried dropper loop, or knocker rigs. Using a pyramid or sinker that digs in would probable cause a proficient number of unwanted structural hookups.

Less knots between your hook and your line is ideal, and so keeping your rig uncomplicated offshore is advised.

Fish Finder Rig for Redfish

When targeting redfish, you're going to need to beef upwardly your rig. Nosotros recommend using a braid mainline with your sliding sinker tied to a 100-300 pound barrel hinge.

Use 1-3 feet of 20-50lb monofilament or fluorocarbon of your choice. Necktie that leader off to a 4/0 to 12/0 circle hook depending on the size of red you're targeting. Employ a snell knot or whichever knot you feel comfy tying.

Fish Finder Rig for Stripers

The fish finder rig for stripers doesn't deviate much from the version for redfish. We recommend sticking with a 6 to 30 inch 30-60 pound fluorocarbon for your leader, keeping the rest the same equally above.

Fish Finder Rig vs Carolina Rig

The fish finder rig differs from the Carolina Rig in that it generally uses a weight that volition secure itself against the lesser whereas the egg sinker for the Carolina will move easier.

They both have the disadvantage of using multiple knots between the hook and the mainline which tin lead to breakage.

The fish finder rig also has a disadvantage of allowing the weight to cause a stress point if they become hung up on structure or are big enough to violently toss the weight effectually.

What Is the Best Rig for Surf Line-fishing?

The best rig for surf line-fishing depends on what you're targeting, the tackle you accept bachelor, and your comfort rigging it up.

If yous're express on tackle and don't take access to swivels, sliders, and beads, so you tin can opt for a rig like the Spider Hitch Rig. If you wanted more than one hook you tin can cutting the main loop and double upward your hooks.

This will allow one knot between your hook and your mainline which can be safer if you're non proficient in tying knots.

How Exercise Y'all Fish a Spec Rig?

Some other less common rig to cheque out would be the spec rig. This is a adept option if you lot desire to fish two artificial lures at the same time. You can fish it from shore, merely at that place's likely a loftier probability of hooking upward on structure. Using information technology like you would a double dropper from a boat would be more idea.

The Anglers Behind This Article:

Johanes Godoy
Editor

Aye No